Single Phase to Three Phase Power Upgrade in Sydney: Do You Need It?

asal electrical logo squareA.SAL Electrical Services
New switchboard with three main switches and RCBO safety switches, fitted during a three-phase upgrade in Randwick

Three-phase power brings electricity into a property through three active wires instead of one, which gives it more capacity for high-demand equipment. Upgrading from single-phase usually means replacing the service line, the metering, the main switch and the protection devices (MPDs, or service fuses). That’s all supply-side work, so it has to be done by an accredited Level 2 ASP.

Single-phase vs three-phase power: what’s the difference?

Single-phase power comes into a property through one active wire, which limits how much power can be used at once. Most older Sydney homes are set up this way.

Old meter box on a Randwick home showing two round dial meters and an original single-phase switchboard
The Randwick setup before the upgrade: a single-phase supply with the original meters still in place.

Three-phase power uses three active wires and spreads the electrical load across them. That gives you more capacity for things like air conditioning, swimming pools, saunas and spas, EV charging, induction cooking, solar and batteries.

You don’t need to swap your appliances to benefit. Most household appliances still run on single-phase power. The upgrade simply gives your home more overall capacity to draw on.

Do you need three-phase power?

You may need it if your existing supply can’t comfortably support the electrical features you want to use. Common reasons Sydney homeowners upgrade:

  • An EV charger, especially alongside other high-demand appliances
  • Ducted or larger air conditioning systems
  • Induction cooktops and other high-load kitchen appliances
  • Swimming pools, saunas and spas
  • Larger solar systems, particularly when batteries are planned too
  • Workshops, tools or machinery that draw significant power

You don’t always need three-phase for an EV charger, but it can be the right option when your single-phase supply doesn’t have enough capacity. Our EV charger installation page has more on this.

If you’re asking “do I need three-phase?”, the answer depends on your current supply, your switchboard capacity and what you’re planning to install. A site assessment and written quote is the only way to know for sure.

How a three-phase upgrade works in the Ausgrid area

Every property is different, but most upgrades follow the same broad steps.

  1. We assess your existing supply, meter location, switchboard and point of attachment.
  2. We work out what has to change to support a three-phase connection and the features you’re planning.
  3. We upgrade the main service line and consumer mains from the point of attachment, and install three-phase cable and Main Protection Devices (MPDs, or service fuses) to increase the capacity of power to the premises.
  4. Because the service line, metering and supply-side equipment are involved, this is Level 2 work. As an accredited Level 2 ASP, we handle the technical requirements and coordinate the work.

How much does a three-phase power upgrade cost in Sydney?

As a guide, a single phase to three phase upgrade in Sydney generally runs from around $1,990 to $6,600, including GST.

The three phase upgrade cost varies a lot from home to home. The main factors:

  • The condition and capacity of your existing supply
  • The distance and route of the service line
  • The size and condition of your switchboard
  • Whether the meter box needs to be relocated

A site visit and written quote is the only way to confirm the cost for your property. We’ll assess what’s there now, explain what has to change, and give you a clear price before any work begins.

How long does it take, and will the power go off?

How long it takes depends on the scope of the upgrade, your existing supply, and whether any network or approval steps are required. Most upgrades are a one-day job.

The power does need to go off, usually for 6 to 9 hours, while the three-phase service line is being upgraded.

We tell you about any planned outage as part of the quote, so you can plan around it.

Why a three-phase upgrade needs a Level 2 electrician

A three-phase upgrade involves the supply side of your property: the service line, the metering and the main protection devices. A regular electrician isn’t licensed to carry out that work, and our Level 2 vs regular electrician guide explains why.

Point of attachment where the overhead service line connects to the fascia of a Randwick home
The point of attachment, where the network’s supply meets the property.

An accredited Level 2 ASP is qualified to work on the connection between the electricity network and your property. Our Level 2 electrician page covers what that accreditation actually allows.

Adolfo from A.SAL Electrical in Level 2 work gear beside the van on a job in Coogee
Adolfo on another Level 2 job, in Coogee.

A recent three-phase upgrade in Randwick

In September 2026 we completed a single-phase to three-phase upgrade on a home in Randwick. The new owners wanted enough capacity for an EV charger, air conditioning, an induction cooktop, a pool, spa and sauna, plus provision for a large solar system and batteries.

The existing single-phase supply was only providing 63 amps. The switchboard was full as well, so it needed upgrading to handle the new load and leave room for what’s coming.

Old switchboard at a Randwick home, full of circuits with hand-written labels and no space left
The old board was full, with no room for what the owners were planning.

To accommodate the increased electrical load, we upgraded the main service line and consumer mains from the point of attachment and converted the property to a three-phase electrical supply. Each phase is protected at 80 amps, providing a total available supply capacity of 240 amps across the premises.

Three-phase meter box with three main protection devices and a new switchboard fitted with RCBOs
After: three MPDs at 80A each, and a new board with room to grow.

We upgraded the existing switchboard capacity to 18 poles and installed three new Main Protection Devices (MPDs). The works also included the installation of a new neutral link, earth electrode bar, and three-phase main switch.

This upgrade significantly increases the property’s electrical capacity and provides greater flexibility for current and future electrical demands.

The owners had originally asked for the meter box to be moved to the side of the house. When Adolfo investigated, obstructions inside the existing structure meant that wasn’t possible.

Galvanised meter box closed up in its original position on the side of a Randwick home
The box stayed where it was. Moving it wasn’t possible, so the upgrade happened in place.

So we kept the meter box and switchboard where they were and completed the upgrade in place. It suited both the property and the owners’ plans. Rather than seeing challenges like this as obstacles, Adolfo sees them as opportunities to think outside the box and find practical, efficient solutions that achieve the best result for the client. You can see more of our local work on our Randwick page.

Thinking about three-phase power?

If you’re planning an EV charger, ducted air conditioning, induction cooking, a swimming pool, sauna or spa, solar or batteries, it’s worth checking your supply has the capacity first. Finding out before you buy can save you from an install that then has to wait on an upgrade.

We can assess your property, tell you whether a three-phase upgrade is needed, and give you a written quote for the work. Because it involves supply-side equipment it needs an accredited Level 2 ASP, and that’s what we are.

Call 0411 167 798 or get in touch to book a site visit.

Get a Free Electrical Quote in Sydney

Ready to Get Started?

No job too big, no question too small. We’re easy to reach and happy to help.

light globes background